View M170EG01V5_6394383.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ver 0.1 1 /29 product specification m170eg01 v.5 au optronics corporation product specification 17.0? s xga color tft - lcd module model name: m170 eg01 v.5 approved by prepared by ddbu marketing division / au optronics corporation customer checked & approv ed by www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 2 /29 product specification m170eg01 v.5 product specification 17.0? s xga color tft - lcd module model name: m170 eg01 v.5 ( u ) preliminary specifications ( ) final specifications note: this specification is subject to change without notice. www.datasheet.co.kr datasheet pdf - http://www..net/
ver 1.0 3 /29 contents 1.0 handling precautions ................................ ........................ 6 2.0 general description ................................ ........................... 7 2.1 display characteristics ................................ ................................ ................................ ... 7 2.2 functional block diagram ................................ ................................ ................................ 8 2.3 optical characteristics ................................ ................................ ................................ ... 9 2.4 pixel format image ................................ ................................ ................................ ....... 12 3.0 electrical cha racteristics ................................ .................. 13 3.1 absolute maximum ratings ................................ ................................ ............................ 13 3.2 connectors ................................ ................................ ................................ ............... 14 3.3 sig nal pin ................................ ................................ ................................ ................. 14 3.4 signal description ................................ ................................ ................................ ....... 15 3.5 signal electrical characteristics ................................ ................................ ....................... 18 3.6 interface timings ................................ ................................ ................................ ......... 18 3.6.1 timing characteristics ................................ ................................ ......................... 18 3.6.2 timing definition ................................ ................................ ................................ . 19 3.8 power on/off sequence ................................ ................................ .............................. 21 4.0 backlight characteristics ................................ ................. 22 4.1 signal for lamp connector ................................ ................................ .............................. 22 4.2 parameter guideline for ccfl inverter ................................ ................................ ................. 22 5.0 vibration, shock, and drop ................................ .............. 23 5.1 vibration & s hock ................................ ................................ ................................ ....... 23 5.2 drop test ................................ ................................ ................................ .................. 23 6.0 environment ................................ ................................ .... 23 6.1 temperature and humidity ................................ ................................ .............................. 23 6.1.1 operating conditions ................................ ................................ ........................... 23 6.1.2 shipping conditions ................................ ................................ ............................. 23 6.2 atmosph eric pressure ................................ ................................ ................................ ... 24 6.3 thermal shock ................................ ................................ ................................ ........... 24 7.0 reliability ................................ ................................ ........ 24 7.1 failure crit eria ................................ ................................ ................................ ............ 24 7.2 failure rate ................................ ................................ ................................ .............. 24 7.2.1 usage ................................ ................................ ................................ .............. 24 8.0 safety ................................ ................................ .............. 25 8.1 sharp edge requirements ................................ ................................ .............................. 25 8.2 materials ................................ ................................ ................................ .................. 25 8.2.1 toxicity ................................ ................................ ................................ ............ 25 8.2.2 flammability ................................ ................................ ................................ ...... 25 8.3 capacitors ................................ ................................ ................................ ................ 25 www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 4 /29 product specification m170eg01 v.5 9.0 other requirement ................................ ........................... 26 9.1 national test lab requirement ................................ ................................ ......................... 26 9.2 label ................................ ................................ ................................ ...................... 26 10.0 mechanical characteristics ................................ ............ 27 www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 5 /29 product specification m170eg01 v.5 record of revision version and date page old description new description remark 0.1 200 5 / 2 / 28 all first edition for customer all www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 6 /29 product specification m170eg01 v.5 1.0 handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not pr ess the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interfa ce connector of the tft module. 11) after installation of the tft module into an enclosure (desktop monitor bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 7 /29 product specification m170eg01 v.5 2.0 general description this specification applies to the 17.0 inch color tft/lcd module m170eg01 v5 . this module is designed for a display unit of personal computer. the display supports the sxga (1280(h) x 1024(v)) screen format and 16.2m colors (rgb 6 - bits + frc data). all input signals are 2 channel lvds interface compatible. this module does not contain an inverter card for backlight. 2.1 display characteristics the following items are characteristics summary on the table under 25 j condition: items unit specifications screen diagonal [mm] 432(17.0") active area [mm] 337.920 (h) x 270.336(v) pixels h x v 1280(x3) x 1024 pixel pitch [mm] 0.264 (per one triad) x 0.264 pixel arrangement r.g.b. vertical stripe display mode nor mally white white luminance [cd/m 2 ] 260 (typ) contrast ratio 450 : 1 (typ) optical rise time/fall time [msec] 1 6 (typ) color saturation 72% ntsc nominal input voltage vdd [volt] +5.0 v power consumption (vdd line + ccfl line) [watt] 25.8 w( typ ) (pdd =6 w, pcfl =19.8 w @lamp=7.5ma ) weight [grams] 1900 (typ) min. typ. max. horizatal(h) 358 358.5 359.0 vertical(v) 296 296.5 297 physical size [mm] depth(d) 16.5 17.0 17.5 electrical interface dual channel lvds support color 16.2m colo rs (rgb 6 - bit + frc data) temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 - 20 to +60 www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 8 /29 product specification m170eg01 v.5 2.2 functional block diagram the following diagram shows the functional block of the 17.0 inches color tft/lcd module: fi - xb30srl - hf11 / mdf76lbrw - 30s - 1h jst - bhsr - 02vs - 1 ( 2pin ?? 2 ) mating type : jae fi - x30c2l / hrs mdf76g - 30p - 1sd sm02b - bhs s - 1 - tb connector dc/dc converter lvds receiver timing controller gamma correction tft - lcd 1280*(3)*1024 pixels x - driver ic y - driver ic g1 g1024 d1 d3840 inv erter dc power 4 ccfl au asic rsds transmitte r r lvds + 5v www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 9 /29 product specification m170eg01 v.5 lcd module pr-880 / bm5a / bm7 module driving equipment measuring distance 2.3 optical characteristics the optical characteristics are measure d under stable conditions at 25 j (room temperature) : item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) 60 60 70 70 - - vertical (up) cr = 10 (down) 60 50 70 60 - - horizontal (right) cr = 5 (left) 70 70 80 80 viewing angle [degree] vertical (up) cr = 5 (down) 70 70 80 80 contrast ratio normal direction 250 450 - - rising time - 12 20 falling time - 4 5 response time [msec] rising + falling - 16 25 note 1 red x 0.61 0.64 0.67 - red y 0.3 1 0.34 0.37 - green x 0.26 0.29 0.32 - green y 0.58 0.61 0.64 - blue x 0.11 0.14 0.17 - color / chromaticity coordinates (cie) blue y 0.04 0.07 0.1 0 - white x 0.28 0.31 0.34 - color coordinates (cie) white white y 0.3 0 0.3 3 0.36 - white luminance @ ccfl 7.5ma (center) [cd/m 2 ] 210 260 - luminance uniformity [%] 75 80 note 2 crosstalk (in 75hz) [%] 1.5 note 3 flicker db - 20 note 4 equipment : pattern generator, power supply, digital voltmeter, luminance meter (pr 880, bm - 5a / bm7, cs - 1000, ca210, sr_3, ez contrast * , optiscope& westar trd - 100 ) aperture 1 x with 100cm vd or 2 x with 50cm viewing distance test point center ( vesa point 9 ) environment < 1 lux * ez contrast is a different measurement tool with very close viewing distance. www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 10 /29 product specification m170eg01 v.5 note 1: definition of response time the output s ignals of photodetector are measured when the input signals are changed from ? full black ? to ? full white ? (rising time), and from ? full white? to ? full black ?(falling time), respectively. the response time is interval between the 10% and 90% of amplitudes . note 2: brightness uniformity of these 9 points is defined as below 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = 50 % 90 % 90 % 50 % 10 % 10 % 100 90 10 0 % optical response white black white tr f tr r 100 90 10 0 % optical response white black white tr f tr r www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 11 /29 product specification m170eg01 v.5 note 3: unit: percentage of dimension of display area l l a - l a? l / l a x 100%= 1.5% max., l a and l b are brightness at location a and b l l b - l b? l / l b x 100%= 1.5% max., l a? and l b? are brightness at location a? and b? note4: test paterm : subchecker pattern r g b r g b r g b r g b r g b r g b method : record dbv & dc value with (westar)trd - 100 level dc hz) 30 level(at ac log 20 (db) flicker = 0 gray level 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a? b? 184 gray level 184 gray level gray level = l127 gray level = l0 amplitude time dc ac www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 12 /29 product specification m170eg01 v.5 2.4 pixel format image following figure shows the relationship of the input signals and lcd pixel format. odd odd odd even even even r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b 1 st 1024 th www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 13 /29 product specification m170eg01 v.5 3.0 electrical characteristics 3.1 absolute maximum ratings absolute maximum ratings of the module is as following: item symbol min max unit conditions logic/lcd drive voltage vin - 0.3 6 [volt] ccfl current icfl - 8 .5 [ma] rms operati ng temperature top 0 +50 [ o c] note operating humidity hop 5 90 [%rh] note storage temperature tst - 20 +60 [ o c] note storage humidity hst 5 90 [%rh] note please refer the graph below for corresponding of min/max values of temperature and humidity. n ote : maximum wet - bulb should be 39 j and no condensation. www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 14 /29 product specification m170eg01 v.5 3.2 connectors physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be foll owing components. connector name / designation interface connector / interface card manufacturer jae or compatible type part number fi - xb30srl - hf11 / mdf76lbrw - 30s - 1h mating housing part number jae fi - x30c2l / hrs mdf76g - 30p - 1sd connector name / desi gnation lamp connector / backlight lamp manufacturer jst type part number bhsr - 02vs - 1 mating type part number sm02b - bhs s - 1 - tb 3.3 signal pin pin# signal name pin# signal name 1 rxo in 0 - 2 rxo in 0+ 3 rxo in 1 - 4 rxo in 1+ 5 rxo in 2 - 6 rxo in 2+ 7 vss 8 rxoc lkin - 9 rxoc lkin + 10 rxo in 3 - 11 rxo in 3+ 12 rxe in 0 - 13 rxe in 0+ 14 vss 15 rxe in 1 - 16 rxe in 1+ 17 vss 18 rxe in 2 - 19 rxe in 2+ 20 rxec lkin - 21 rxec lkin + 22 rxe in 3 - 23 rxe in 3+ 24 vss 25 vss 26 nc 27 vss 28 vcc 29 vcc 30 vcc www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 15 /29 product specification m170eg01 v.5 3.4 signa l description the module using a pair of lvds receiver sn75lvds82(texas instruments) or compatible. lvds is a differential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. pin # signal name description 1 rxo in 0 - negative lvds differential data input (odd data) 2 rxo in 0+ positive lvds differential data inp ut (odd data) 3 rxo in 1 - negative lvds differential data input (odd data) 4 rxo in 1+ positive lvds differential data input (odd data) 5 rxo in 2 - negative lvds differential data input (odd data,h - sync,v - sync,dsptmg) 6 rxo in 2+ positive lvds differential dat a input (odd data, h - sync,v - sync,dsptmg) 7 vss power ground 8 rxoc lkin - negative lvds differential clock input (odd clock) 9 rxoc lkin + positive lvds differential clock input (odd clock) 10 rxo in 3 - negative lvds differential data input (odd data) 11 rx o in 3+ positive lvds differential data input (odd data) 12 rxe in 0 - negative lvds differential data input (even data ) 13 rxe in 0+ positive lvds differential data input (even data) 14 vss power ground 15 rxe in 1 - positive lvds differential data input (even data) 16 rxe in 1+ negative lvds differential data input (even data) 17 vss power ground 18 rxe in 2 - negative lvds differential data input (even data) 19 rxe in 2+ positive lvds differential data input (even data) 20 rxec lkin - negative lvds differential cl ock input (even clock) 21 rxec lkin + positive lvds differential clock input (even clock) 22 rxe in 3 - negative lvds differential data input (even data) 23 rxe in 3+ positive lvds differential data input (even data) 24 vss power ground 25 vss power ground 26 nc no connection ( for auo test) 27 vss power ground 28 vcc +5.0v power supply 29 vcc +5.0v power supply 30 vcc +5.0v power supply www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 16 /29 product specification m170eg01 v.5 note 1 : start from left side note 2 : input signals of odd and even clock shall be th e same timing. note 3 : please follow pswg. connector 1 30 rxo in 0 - vcc www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 17 /29 product specification m170eg01 v.5 the input data format : note1 : normally, de, vs, hs on even channel are not used. note 2 : please follow pswg. note 3 : 8 - bit in www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 18 /29 product specification m170eg01 v.5 3.5 signal electrical characteristics each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - 100 [mv] vicm = 1.2v note vtl differential input low threshold - 100 - - [mv] vicm = 1.2v note | vid | i nput differential voltage 100 400 600 [mv] note vicm differential input common mode voltage 1.1 - 1.45 [v] vth/vtl = ? 100mv note note lvds signal waveform 3.6 interface timings 3.6 .1 timing characteristics item symbol min typ max unit data clk tclk 40 54 70 mhz period th 685 844 1024 tclk h - section display area tdisp(h) 640 640 640 tclk period tv 1036 1066 2048 th v - section display area tdisp(v) 1024 1024 1024 th frame rat e f 49 60 76 hz note : de mode only vth x vid x vtl vicm vss www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 19 /29 product specification m170eg01 v.5 3.6.2 timing definition de de clk t clk tblk(v) th tv tdisp(v) tdisp(h) th tblk(h) www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 20 /29 product specification m170eg01 v.5 3.7 power consumption input power specifications are as follows; symbol parameter min typ max units condition vdd logic/lcd drive voltage 4.5 5 5.5 [volt] 10% idd vdd current - 1 2 00 1560 [ma] vin=5v , all black pattern , at 75hz irush lcd inrush current - - 2.5 [a] note pdd vdd power 6 7.8 [watt] vin=5v , all black pattern , at 75hz vddrp allowable logic/lcd drive ripple voltage 100 [mv] p - p vin=5v , all black pattern , at 75hz note: measurement conditions: +5.0v +12.0v sw vcc r1 47k r2 1k vr1 47k f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vin rising time 0 v 5. 0 v 470 us www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 21 /29 product specification m170eg01 v.5 3.8 power on/off sequence vin and lamp power on/off sequence a re as follows. the timing parameters of interface signal are shown in the table below . the signal please re ference ? 3.4 signal description? . values symbol min . typ. max . unit t1 0.5 - 10 ms t2 0 - 10 ms t3 200 - - ms t4 100 - - ms t5 0 16 50 ms t6 - - 10 ms t7 1000 - - ms note: the values of the table are follow pswg. 90% 90% 10% 10% t1 t2 t5 t6 t7 t3 t4 0 v lamp signal vin 10% 0 v 0 v www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 22 /29 product specification m170eg01 v.5 4.0 backlight characteristics 4.1 signal for lamp connector connector no. pin no. input color function 1 hot1 pink high voltage cn1 2 cold1 white low voltage 1 hot2 blue high voltage upper cn2 2 cold2 black low voltage 1 ho t1 pink high voltage cn3 2 cold1 white low voltage 1 hot2 blue high voltage lower cn4 2 cold2 black low voltage 4.2 parameter guideline for c c fl inverter symbol parameter min . typ . max . unit condition iscfl ccfl standard current 7 .0 7.5 8 .0 [ma] rms (ta= 25 o c) note 1 ircfl ccfl operation range 3 .0 7.5 8 .0 [ma] rms (ta=25 o c) fcfl ccfl frequency 40 60 80 [khz] (ta=25 o c) note 2 vicfl (0 o c) ccfl ignition voltage ( end of the lamp wire connector ) 1 50 0 - - [volt] rms (ta=0 o c) vicf (25 o c) ccfl ignition voltage ( end of the lamp wire connector ) 1150 - - [volt] rms (ta=25 o c) vcfl ccfl operation voltage - 660 @7.5ma 700 @3.0ma [volt] rms (ta=25 o c) note 1 pcfl ccfl power consumption (for reference) - 19.8 21.8 [watt] (ta=25 o c) note 3 ltcfl ccfl life time 30,000 50,000 - [ hour ] (ta=25 o c) note 4 note 1 : ccfl standard current is measured at 25 ? 2 j . note 2 : ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd note 3 : the variance of ccfl power consumption is 10% . calculat or value for reference (icflvcfl 4 =pcfl) . note 4 : ccfl life time is determined as the time a t which brightness of lamp is 50% . the typical life time of ccfl is on the condition at 7.5 ma lamp current. www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 23 /29 product specification m170eg01 v.5 5.0 vibration, shock, and drop 5.1 vibration & sho ck vibration test spec: l frequency: 10 - 200hz l sweep: 30 minutes each axis (x, y, z) l acceleration: 1.5g(10~200hz p - p) l test method: acceleration (g) 1.5 frequency (hz) 10~200~10 active time (min) 30 shock test spec: acceleration (g) ? a 50 active tim e - b 20 ms wave form h alf - sin times 1 l direction: ? x , ? y, ? z 5. 2 drop test package test: the drop height is 60 cm. 6.0 environment the display module will meet the provision of this specification during operating condition or after storage or shipment condition specified below. operation at 10% beyond the specified range will not cause physical damage to the unit. 6.1 temperature and humidity 6.1.1 operating conditions the display module operates error free, when operated under the following conditio ns; temperature 0 0 c to 50 0 c relative humidity 8% to 95% wet bulb temperature 39.0 0 c 6.1.2 shipping conditions the display module operates error free, after the following conditions; temperature - 20 0 c to 60 0 c relative humidity 5% t o l00% wet bulb temperature 39.0 0 c www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 24 /29 product specification m170eg01 v.5 6.2 atmospheric pressure the display assembly is capable of being operated without affecting its operations over the pressure range as following specified; pressure note maximum pressure 1040hpa (sea level) m inimum pressure 674hpa (3048m) 6.3 thermal shock the display module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature change consists of varying the temperature from - 20 0 c to 60 0 c, a nd back again. thermal shock cycle - 20 0 c for 30min 60 0 c for 30min power is not applied during the test. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before powering on. 7.0 reliability this display module and the packaging of that will comply following standards. 7.1 failure criteria the display assembly will be considered as failing unit when it no longer meets any of the requirements stated in this specification. only as for maximum white luminan ce, following criteria is applicable. l maximum white luminance shall be 150 cd/m 2 or more. 7.2 failure rate the average failure rate of the display module (from first power - on cycle till 1,000 hours later) will not exceed 1.0%. the average failure rate of t he display module from 1,000 hours until 16,000 hours will not exceed 0.7% per 1000 hours. 7.2.1 usage the assumed usage for the above criteria is: l 220 power - on hours per month l 500 power on/off cycles per month l maximum brightness setting l operation to be w ithin office environment (25 0 c typical) www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 25 /29 product specification m170eg01 v.5 8.0 safety 8.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 8.2 materials 8.2.1 toxicity there will be no carcinogenic materials used anywh ere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible adt toxicologist. 8.2.2 flammability all components including electrical components that do not meet the flammability grade ul94 - v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94 - v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 8.3 capacitors if any polari zed capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. www.datasheet.co.kr datasheet pdf - http://www..net/
ver 0.1 26 /29 product specification m170eg01 v.5 9.0 other requirement 9. 1 national test lab requirement the display module will satisfy all requirements for compliance to ul 1950, first edition u.s.a. information technology equipment csa c22.2 no.950 - m89 canada, information technology equipment eec 950 international, information technology equipment en 60 950 international, information processing equipmen t (european norm for iec950) 9. 2 label the label is on the panel as shown below: www.datasheet.co.kr datasheet pdf - http://www..net/
ver 1.0 27 /29 10.0 mechanical characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
ver 1.0 28 /29 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of M170EG01V5

	To Download M170EG01V5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .